建站
咨詢
售后
建站咨詢
新聞中心
How to Set NTP Sync Interval on Linux
NTP (Network Time Protocol) is a protocol used to synchronize the clocks of computers in a network. It is an essential tool for any administrator who wants to ensure the systems in their network are up to date with the correct time. In this article, we will discuss how to set the NTP sync interval on Linux.
Step 1: Install NTP on your Linux machine
Before we can proceed with setting the NTP sync interval, we need to first install NTP on our Linux machine. This can be done by running the following command in the terminal:
sudo apt-get install ntp
This command will install the NTP package on your Linux machine. Once installed, we can proceed with setting the NTP sync interval.
Step 2: Determine the current NTP sync interval
To determine the current NTP sync interval on your Linux machine, you can run the following command in the terminal:
ntpq -pn
This command will display the list of NTP servers that your machine is synchronizing with along with the time offset from your machine’s clock. The “reach” column in the output displays the sync interval in seconds. The default NTP sync interval on Linux is 64 seconds. However, this can be changed by modifying the NTP configuration file.
Step 3: Modify the NTP configuration file to set the sync interval
To modify the NTP configuration file, navigate to the following location on your Linux machine:
/etc/ntp.conf
Open the file using your preferred text editor and look for the “minpoll” and “maxpoll” directives. These directives define the minimum and maximum poll intervals in seconds that the NTP client should use when communicating with the NTP servers.
The default values for these directives are “minpoll 6” and “maxpoll 10”. This means that the NTP client will poll the NTP servers every 64 to 1024 seconds (2^6 to 2^10) to synchronize the time.
To set a new sync interval, modify the values of the “minpoll” and “maxpoll” directives accordingly. For example, to set the sync interval to 30 seconds, you can modify the directives as follows:
minpoll 5
maxpoll 6
Save the file and restart the NTP service using the following command:
sudo systemctl restart ntp
Step 4: Verify the new NTP sync interval
To verify that the new NTP sync interval has been applied, you can run the “ntpq -pn” command agn. The output should display the new sync interval in the “reach” column.
Conclusion
In conclusion, setting the NTP sync interval on Linux is a strghtforward process that can be done by modifying the “minpoll” and “maxpoll” directives in the NTP configuration file. By changing the sync interval, you can ensure that your Linux machine’s clock is synchronized with the correct time at the desired frequency.
相關問題拓展閱讀：
- ntp時間同步配置
ntp時間同步配置
vi /etc/ntp.conf 添加內網ntp服務器。
systemctl start ntpd 啟動ntpd服務早轎
ntpstat 命令查看時間同步狀態，這個一般需要5-10分鐘后州睜鉛才能成功連接和同步。所以，服務器啟動后需要稍等下。
剛啟動的時候，一般是：
連接并同步后
*表示目前使用的ntp server；
st：即stratum階層，值越小表示ntp serve的精準度越高；
when：幾秒前曾做過時間同步更新的操作；
Poll表示，每隔多少毫秒與ntp server同步一次；
reach：已經向上層NTP服務器要求更新的次數；
delay：網絡傳輸過程鐘延遲的時間；
offset：時冊好間補償?shù)慕Y(jié)果；
jitter：Linux系統時間與BIOS硬件時間的差異時間
關于linux設置ntp同步間隔的介紹到此就結束了，不知道你從中找到你需要的信息了嗎 ？如果你還想了解更多這方面的信息，記得收藏關注本站。
成都創新互聯建站主營：成都網站建設、網站維護、網站改版的網站建設公司，提供成都網站制作、成都網站建設、成都網站推廣、成都網站優化seo、響應式移動網站開發制作等網站服務。
網頁標題：如何設置Linux下的NTP同步間隔？(linux設置ntp同步間隔)
文章鏈接：http://www.dlmjj.cn/article/djsjohj.html
