建站
咨詢
售后
建站咨詢
新聞中心
traceroute我們可以知道信息從你的計算機到互聯網另一端的主機是走的什么路徑。當然每次數據包由某一同樣的出發點（source）到達某一同樣的目的地(destination)走的路徑可能會不一樣，但基本上來說大部分時候所走的路由是相同的。
成都創新互聯公司專業為企業提供憑祥網站建設、憑祥做網站、憑祥網站設計、憑祥網站制作等企業網站建設、網頁設計與制作、憑祥企業網站模板建站服務，10余年憑祥做網站經驗，不只是建網站，更提供有價值的思路和整體網絡服務。
常見命令參數
Options:
-4 Use IPv4
-6 Use IPv6
-d --debug Enable socket level debugging
-F --dont-fragment Do not fragment packets
-f first_ttl --first=first_ttl
Start from the first_ttl hop (instead from 1)
-g gate,... --gateway=gate,...
Route packets through the specified gateway
(maximum 8 for IPv4 and 127 for IPv6)
-I --icmp Use ICMP ECHO for tracerouting
-T --tcp Use TCP SYN for tracerouting
-i device --interface=device
Specify a network interface to operate with
-m max_ttl --max-hops=max_ttl
Set the max number of hops (max TTL to be
reached). Default is 30
-N squeries --sim-queries=squeries
Set the number of probes to be tried
simultaneously (default is 16)
-n Do not resolve IP addresses to their domain names
-p port --port=port Set the destination port to use. It is either
initial udp port value for "default" method
(incremented by each probe, default is 33434), or
initial seq for "icmp" (incremented as well,
default from 1), or some constant destination
port for other methods (with default of 80 for
"tcp", 53 for "udp", etc.)
-t tos --tos=tos Set the TOS (IPv4 type of service) or TC (IPv6
traffic class) value for outgoing packets
-l flow_label --flowlabel=flow_label
Use specified flow_label for IPv6 packets
-w waittime --wait=waittime
Set the number of seconds to wait for response to
a probe (default is 5.0). Non-integer (float
point) values allowed too
-q nqueries --queries=nqueries
Set the number of probes per each hop. Default is
3
-r Bypass the normal routing and send directly to a
host on an attached network
-s src_addr --source=src_addr
Use source src_addr for outgoing packets
-z sendwait --sendwait=sendwait
Minimal time interval between probes (default 0).
If the value is more than 10, then it specifies a
number in milliseconds, else it is a number of
seconds (float point values allowed too)
-e --extensions Show ICMP extensions (if present), including MPLS
-A --as-path-lookups Perform AS path lookups in routing registries and
print results directly after the corresponding
addresses
-M name --module=name Use specified module (either builtin or external)
for traceroute operations. Most methods have
their shortcuts (`-I' means `-M icmp' etc.)
-O OPTS,... --options=OPTS,...
Use module-specific option OPTS for the
traceroute module. Several OPTS allowed,
separated by comma. If OPTS is "help", print info
about available options
--sport=num Use source port num for outgoing packets. Implies
`-N 1'
-U --udp Use UDP to particular port for tracerouting
(instead of increasing the port per each probe),
default port is 53
-UL Use UDPLITE for tracerouting (default dest port
is 53)
-P prot --protocol=prot Use raw packet of protocol prot for tracerouting
--mtu Discover MTU along the path being traced. Implies
`-F -N 1'
--back Guess the number of hops in the backward path and
print if it differs
-V --version Print version info and exit
--help Read this help and exit
常見命令展示
多命令使用
traceroute -n -m 5 -q 4 -w 3 www.baidu.com
說明： -n 顯示IP地址，不查主機名， -m 設置跳數
-q 4每個網關發送4個數據包 -w 把對外發探測包的等待響應時間設置為3秒
探測包使用的基本UDP端口設置6888
traceroute -p 6888 www.baidu.com
繞過正常的路由表，直接發送到網絡相連的主機
traceroute -r www.baidu.com
本篇文章到此結束，如果您有相關技術方面疑問可以聯系我們技術人員遠程解決，感謝大家支持本站！
香港服務器選創新互聯，2H2G首月10元開通。
創新互聯（www.cdcxhl.com）互聯網服務提供商,擁有超過10年的服務器租用、服務器托管、云服務器、虛擬主機、網站系統開發經驗。專業提供云主機、虛擬主機、域名注冊、VPS主機、云服務器、香港云服務器、免備案服務器等。
新聞名稱：Linuxtraceroute命令使用詳解
當前URL：http://www.dlmjj.cn/article/djiojsp.html
