建站
咨詢
售后
建站咨詢
新聞中心
這里有您想知道的互聯網營銷解決方案
如何對XFS進行備份、恢復、修復
XFS是高性能文件系統，由于它的高性能，XFS成為了許多企業級系統的首選，特別是有大量數據，需要結構化伸縮性和穩定性的。例如，RHEL/CentOS 7 和Oracle Linux將XFS作為默認文件系統，SUSE/openSUSE已經為XFS做了長期支持，本篇文章重點為大家講解一一下XFS文件系統的備份、恢復、修復。
成都創新互聯公司長期為上千客戶提供的網站建設服務，團隊從業經驗10年，關注不同地域、不同群體，并針對不同對象提供差異化的產品和服務；打造開放共贏平臺，與合作伙伴共同營造健康的互聯網生態環境。為田東企業提供專業的成都網站制作、成都網站建設、外貿營銷網站建設，田東網站改版等技術服務。擁有十載豐富建站經驗和眾多成功案例,為您定制開發。
一、XFS文件系統的備份與恢復
XFS文件系統提供了整個分區備份的工具xfsdump供用戶使用，用戶可以在不借助第三方軟件的情況下對XFS文件系統上的數據實施備份。
創建XFS分區及測試文件
[root@localhost ~]# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sdb
[root@localhost ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +1G
Partition 1 of type Linux and of size 1 GiB is set
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost ~]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@localhost ~]# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1
[root@localhost ~]# mkfs.xfs -f /dev/sdb1
meta-data=/dev/sdb1 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@localhost ~]# blkid /dev/sdb1
/dev/sdb1: UUID="61a5e59d-92d3-458d-ac09-7d945469cda6" TYPE="xfs"
[root@localhost ~]# mkdir /file
[root@localhost ~]# echo "/dev/sdb1 /file xfs defaults 0 0" >> /etc/fstab
[root@localhost ~]# mount -a
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/rhel-root 17G 1.9G 16G 12% /
devtmpfs 901M 0 901M 0% /dev
tmpfs 912M 0 912M 0% /dev/shm
tmpfs 912M 8.7M 903M 1% /run
tmpfs 912M 0 912M 0% /sys/fs/cgroup
/dev/sr0 3.8G 3.8G 0 100% /yum
/dev/sda1 1014M 143M 872M 15% /boot
tmpfs 183M 0 183M 0% /run/user/0
/dev/sdb1 1014M 33M 982M 4% /file
[root@localhost ~]# cd /file/
[root@localhost file]# ls
[root@localhost file]# touch file{1..100}
[root@localhost file]# ls
file1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96
file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97
file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98
file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99
file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92
file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93
file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94
file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95
備份XFS分區
[root@localhost file]# mkdir /backup
[root@localhost file]# yum install -y xfsdump
[root@localhost file]# xfsdump -f /backup/file.bak /file
#利用xfsdump備份掛載點/file對應的分區
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.4 (dump format 3.0) - type ^C for status and control
============================= dump label dialog ==============================
#輸入dump會話標簽
please enter label for this dump session (timeout in 300 sec)
-> file.bak
session label entered: "file.bak"
--------------------------------- end dialog ---------------------------------
xfsdump: level 0 dump of localhost.localdomain:/file
xfsdump: dump date: Thu Oct 31 22:16:02 2019
xfsdump: session id: 02a1445f-5ff3-4518-ab2c-888d9e2a4c44
xfsdump: session label: "file.bak"
xfsdump: ino map phase 1: constructing initial dump list
xfsdump: ino map phase 2: skipping (no pruning necessary)
xfsdump: ino map phase 3: skipping (only one dump stream)
xfsdump: ino map construction complete
xfsdump: estimated dump size: 52800 bytes
============================= media label dialog =============================
#輸入媒體標簽
please enter label for media in drive 0 (timeout in 300 sec)
-> file
media label entered: "file"
--------------------------------- end dialog ---------------------------------
xfsdump: creating dump session media file 0 (media 0, file 0)
xfsdump: dumping ino map
xfsdump: dumping directories
xfsdump: dumping non-directory files
xfsdump: ending media file
xfsdump: media file size 86544 bytes
xfsdump: dump size (non-dir files) : 0 bytes
xfsdump: dump complete: 27 seconds elapsed
xfsdump: Dump Summary:
xfsdump: stream 0 /backup/file.bak OK (success)
xfsdump: Dump Status: SUCCESS
[root@localhost file]# ls /backup/
#已經成功創建備份文件
file.bak
恢復過程
[root@localhost file]# ls
file1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96
file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97
file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98
file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99
file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92
file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93
file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94
file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95
[root@localhost file]# rm -rf *
[root@localhost file]# ls
[root@localhost file]# xfsrestore -f /backup/file.bak /file
xfsrestore: using file dump (drive_simple) strategy
xfsrestore: version 3.1.4 (dump format 3.0) - type ^C for status and control
xfsrestore: searching media for dump
xfsrestore: examining media file 0
xfsrestore: dump description:
xfsrestore: hostname: localhost.localdomain
xfsrestore: mount point: /file
xfsrestore: volume: /dev/sdb1
xfsrestore: session time: Thu Oct 31 22:16:02 2019
xfsrestore: level: 0
xfsrestore: session label: "file.bak"
xfsrestore: media label: "file"
xfsrestore: file system id: 61a5e59d-92d3-458d-ac09-7d945469cda6
xfsrestore: session id: 02a1445f-5ff3-4518-ab2c-888d9e2a4c44
xfsrestore: media id: 2d1d9f33-dff3-4cfa-a2f6-bf65bd8f242b
xfsrestore: using online session inventory
xfsrestore: searching media for directory dump
xfsrestore: reading directories
xfsrestore: 1 directories and 100 entries processed
xfsrestore: directory post-processing
xfsrestore: restoring non-directory files
xfsrestore: restore complete: 0 seconds elapsed
xfsrestore: Restore Summary:
xfsrestore: stream 0 /backup/file.bak OK (success)
xfsrestore: Restore Status: SUCCESS
[root@localhost file]# ls
#已經成功恢復被刪除的文件
file1 file16 file23 file30 file38 file45 file52 file6 file67 file74 file81 file89 file96
file10 file17 file24 file31 file39 file46 file53 file60 file68 file75 file82 file9 file97
file100 file18 file25 file32 file4 file47 file54 file61 file69 file76 file83 file90 file98
file11 file19 file26 file33 file40 file48 file55 file62 file7 file77 file84 file91 file99
file12 file2 file27 file34 file41 file49 file56 file63 file70 file78 file85 file92
file13 file20 file28 file35 file42 file5 file57 file64 file71 file79 file86 file93
file14 file21 file29 file36 file43 file50 file58 file65 file72 file8 file87 file94
file15 file22 file3 file37 file44 file51 file59 file66 file73 file80 file88 file95
二、XFS文件系統的檢查和修復
創建XFS測試分區
[root@localhost file]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (2099200-41943039, default 2099200):
Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-41943039, default 41943039): +1G
Partition 2 of type Linux and of size 1 GiB is set
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x08a5199d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
/dev/sdb2 2099200 4196351 1048576 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost file]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@localhost file]# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1 /dev/sdb2
[root@localhost file]# mkfs.xfs /dev/sdb2
meta-data=/dev/sdb2 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
檢查XFS文件系統，如果檢查過程中發現問題將會列出
[root@localhost file]# xfs_repair -n /dev/sdb2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
- zero log...
- scan filesystem freespace and inode maps...
- found root inode chunk
Phase 3 - for each AG...
- scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... No modify flag set, skipping filesystem flush and exiting. 自動檢查并修復XFS文件系統
[root@localhost file]# xfs_repair /dev/sdb2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
- zero log...
- scan filesystem freespace and inode maps...
- found root inode chunk
Phase 3 - for each AG...
- scan and clear agi unlinked lists...
- process known inodes and perform inode discovery...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- process newly discovered inodes...
Phase 4 - check for duplicate blocks...
- setting up duplicate extent list...
- check for inodes claiming duplicate blocks...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
Phase 5 - rebuild AG headers and trees...
- reset superblock...
Phase 6 - check inode connectivity...
- resetting contents of realtime bitmap and summary inodes
- traversing filesystem ...
- traversal finished ...
- moving disconnected inodes to lost+found ...
Phase 7 - verify and correct link counts...
done
網站題目：如何對XFS進行備份、恢復、修復
文章鏈接：http://www.dlmjj.cn/article/djdodeo.html
