建站
咨詢
售后
建站咨詢
新聞中心
在Linux系統中，掛載U盤是一個常見的操作，通過掛載U盤，我們可以方便地訪問U盤中的文件和目錄，本文將詳細介紹如何在Linux系統中使用C語言編寫程序來掛載U盤。
我們需要了解掛載的基本概念，掛載是將一個文件系統連接到一個已存在的目錄，使得該目錄可以訪問到文件系統中的內容，在Linux系統中，掛載點是一個已存在的目錄，而設備則是需要掛載的文件系統所在的設備，如U盤、硬盤分區等。
接下來，我們將分步驟介紹如何使用C語言編寫程序來掛載U盤。
1、打開設備文件
在Linux系統中，每個設備都有一個對應的設備文件，對于U盤，設備文件通常位于/dev目錄下，如/dev/sdb1，我們可以通過打開設備文件來訪問設備，在C語言中，可以使用open()函數來打開設備文件。
#include#include #include #include #include #include #include int main() { int fd; char *device = "/dev/sdb1"; // U盤設備文件 // 打開設備文件 fd = open(device, O_RDONLY); if (fd == 1) { perror("open"); exit(1); } // 后續操作... }
2、獲取設備信息
在打開設備文件后，我們需要獲取設備的相關信息，如設備類型、塊大小等，這些信息可以通過ioctl()函數和CDROM_GET_CAPABILITIES結構體來獲取。
#include#include #include #include #include #include #include #include int main() { int fd; char *device = "/dev/sdb1"; // U盤設備文件 struct cdrom_capabilities cap; int result; // 打開設備文件 fd = open(device, O_RDONLY); if (fd == 1) { perror("open"); exit(1); } // 獲取設備信息 result = ioctl(fd, CDROM_GET_CAPABILITIES, &cap); if (result == 1) { perror("ioctl"); exit(1); } printf("Device type: %d ", cap.cdrom_capability); printf("Block size: %d ", cap.block_size); printf("Number of blocks: %lld ", (long long)cap.num_blocks); printf("Vendor info: %s ", cap.vendor); printf("Product info: %s ", cap.product); printf("Revision: %d ", cap.revision); printf("Supported commands: %x ", cap.supported_commands); printf("Supported LBA: %d ", cap.max_lbap); printf("Supported multisession: %d ", cap.multisession); printf("Supported audio CD: %d ", cap.audio_support); printf("Supported data CD: %d ", cap.data_support); printf("Supported photo CD: %d ", cap.photo_support); printf("Supported enhanced CD: %d ", cap.enhanced_cd); printf("Supported packet writing: %d ", cap.packet_writing); printf("Supported write once: %d ", cap.writeonce); printf("Supported read only: %d ", cap.readonly); printf("Supported random access: %d ", cap.random_access); printf("Supported CDTEXT: %d ", cap.cdtext_support); printf("Supported ReadtoGo: %d ", cap.cdrw_formats); printf("Supported WritetoGo: %d ", cap.cdrw_speeds); printf("Supported MultiRead: %d ", cap.multiread); printf("Supported Extra Speed: %d ", cap.extra_speed); printf("Supported RW Capabilities: %x ", cap.rwcapabilities); printf("Supported Packet Writing Version: %d ", cap.packet_writing_version); printf("Supported Max Audio Blocks per sector: %d ", cap.max_audio_blocks_per_sector); printf("Supported Min Blocks per sector for formatted media: %d ", cap.min_blocks_per_sector_for_formatted_media); printf("Supported Max Blocks per sector for formatted media: %d ", cap.max_blocks_per_sector_for_formatted_media); printf("Supported Max Sectors per track for formatted media: %d ", cap.max_sectors_per_track_for_formatted_media); printf("Supported Max Tracks per zone for formatted media: %d ", cap.max_tracks_per_zone_for_formatted_media); printf("Supported Min Tracks per zone for formatted media: %d ", cap.min_tracks_per_zone_for_formatted_media); printf("Supported Max Transfer Rate in bytes per second for formatted media: %llu ", (unsigned long long)cap.max_transfer_rate_inbytesps); printf("Supported Max Transfer Rate in frames per second for formatted media: %llu ", (unsigned long long)cap.max_transfer_rate_inframespsfm); printf("Supported Interrupt Type: %d ", cap.interrupt_type); }
3、掛載U盤分區
在獲取設備信息后，我們需要為U盤分區創建一個掛載點，掛載點是一個已存在的目錄，用于訪問設備上的內容，在Linux系統中，可以使用mkmountpoint()函數創建掛載點，使用mount()函數將U盤分區掛載到掛載點上，注意，這里需要使用MOUNT命令來加載U盤分區的內核模塊，在C語言中，可以使用system()函數來執行MOUNT命令，使用mount()函數將U盤分區掛載到掛載點上，需要注意的是，這里的掛載選項可能需要根據實際情況進行調整，如果U盤分區是FAT32格式的，那么掛載選項可以為"vfat"；如果是NTFS格式的，那么掛載選項可以為"ntfs"，還可以根據需要添加其他掛載選項，如讀寫權限等，以下是一個示例代碼：
#include#include #include #include #include #include #include #include #include // mountpoint() and mknod() functions need this header file to work properly on Linux systems with glibc version 2.2 or later versions of the kernel (2.6 or later). If you are using an older version of the kernel, then you may not need this header file at all because it might already be included in another header file that is being included by your program before this one (e).g /usr/src/linux/fs/dcache.c includes sys/stat directly without including any other header files first). Replace "vfat" with the appropriate file system type if necessary (e).g "ntfs"). int main() { char *device = "/dev/sdb1"; // U盤設備文件 char *mountpoint = "/mnt/usb"; // U盤分區的掛載點 mode_t mode = S_IRWXU | S_IRWXG | S_IRWXO; // rwx permissions for owner, group and others if (mkdir(mountpoint, mode) == 1) { perror("mkdir"); exit(1); } if (mountpoint("/dev/sdb1", mountpoint
當前題目：linux怎么掛載u盤c語言
路徑分享：http://www.dlmjj.cn/article/cdhpoig.html
